1992 Acura Integra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Acura Integra, along with offset and center bore data.
1992 Acura Integra Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Integra — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Acura Integra's 4x100 bolt pattern era, which continued through 2001 (10 consecutive years). Wheels from any 1992–2001 Acura Integra are cross-compatible with the 1992 model. Across its full production run (1992–2024), the Integra has also used: 5x114.3.
Acura Integra Bolt Pattern by Year
The table below shows how the Integra's wheel specifications have changed over the years. The 1992 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 474 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 1992 Acura Integra
For your 1992 Acura Integra, the bolt pattern is 5x114.3, shared with all Integras from 1992–2024. The center bore is 64.1mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory offset is 45mm. Using wheels with offset outside 35–55mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball-seat or shank-style nuts. Incorrect lug nuts can lead to wheel loss. Verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, Acura Integra appears from 1992 to 2024 (12 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 64.1mm center bore.
- ✅ Check inner clearance for brake calipers and suspension components when changing offset; a 5mm spacer may be needed for some aftermarket wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
1992 Acura Integra — Frequently Asked Questions
What is the bolt pattern for a 1992 Acura Integra?
The 1992 Acura Integra uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45mm.
What other years of Acura Integra have the same bolt pattern as the 1992?
The Acura Integra uses the 4x100 pattern from 1992 through 2001. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1992 Acura Integra?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 45mm, and a center bore of at least 56.1mm (using hub rings if larger).
What lug nut size does the 1992 Acura Integra use?
The 1992 Acura Integra uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 1992 Acura?
The 1992 Integra uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 45mm offset mean for the 1992 Integra?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Acura.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset