2004 Chrysler Pacifica Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Chrysler Pacifica, along with offset and center bore data.
2004 Chrysler Pacifica Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2004 Pacifica — Year-Specific Fitment Context
The 2004 model year marks the beginning of the Chrysler Pacifica's 5x114.3 bolt pattern era, which continued through 2005 (2 consecutive years). Wheels from any 2004–2005 Chrysler Pacifica are cross-compatible with the 2004 model. Across its full production run (2004–2024), the Pacifica has also used: 5x127.
Chrysler Pacifica Bolt Pattern by Year
The table below shows how the Pacifica's wheel specifications have changed over the years. The 2004 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2004 Chrysler Pacifica
For your 2004 Chrysler Pacifica, the 5x127 bolt pattern is shared with 2004–2024 models, ensuring broad compatibility. However, the 71.6mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball seat, matching the wheel). Improper lug nuts can lead to wheel loosening. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Chrysler Pacifica appears from 2004 to 2024 (13 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 9.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 71.6mm and outer diameter matches wheel bore.
- ✅ Check for brake caliper clearance when changing offset; 2004 Pacifica has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2004 Chrysler Pacifica — Frequently Asked Questions
What is the bolt pattern for a 2004 Chrysler Pacifica?
The 2004 Chrysler Pacifica uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 46mm.
What other years of Chrysler Pacifica have the same bolt pattern as the 2004?
The Chrysler Pacifica uses the 5x114.3 pattern from 2004 through 2005. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Can I use spacers on my 2004 Chrysler Pacifica?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What lug nut size does the 2004 Chrysler Pacifica use?
The 2004 Chrysler Pacifica uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2004 Chrysler Pacifica?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 71.5mm (using hub rings if larger).
Will wheels from another Chrysler fit my 2004 Pacifica?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset