1996 Dodge Viper Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Dodge Viper, along with offset and center bore data.
1996 Dodge Viper Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 70.1 mm |
| Offset (ET) | 50 front, 70 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1996 Viper — Year-Specific Fitment Context
The 1996 Dodge Viper is in year 5 of 26 using the 5x114.3 pattern (1992–2017). Wheels from any 1992–2017 Dodge Viper are cross-compatible with the 1996 model.
Dodge Viper Bolt Pattern by Year
The table below shows how the Viper's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 1993 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 1994 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 1995 | 5x114.3 | 70.1 | 50 front, 70 rear |
| ▸ 1996 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 1997 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 1998 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 1999 | 5x114.3 | 70.5 | 50 front, 70 rear |
| 2000 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2001 | 5x114.3 | 70.5 | 50 front, 70 rear |
| 2002 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2003 | 5x114.3 | 70.5 | 50 front, 70 rear |
| 2004 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2005 | 5x114.3 | 70.5 | 50 front, 70 rear |
| 2006 | 5x114.3 | 70.5 | 50 front, 70 rear |
| 2008 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2009 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2010 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2015 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2016 | 5x114.3 | 70.1 | 50 front, 70 rear |
| 2017 | 5x114.3 | 70.1 | 50 front, 70 rear |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1996 Dodge Viper
The 1996 Dodge Viper uses a 6x114.3mm bolt pattern with a 71.6mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset is critical: front wheels require 50mm offset, rear wheels 70mm offset. Using incorrect offsets can cause rubbing or clearance issues. Always verify lug nut thread pitch: 1/2"-20 UNF. Aftermarket wheels often use conical or ball-seat lug nuts; ensure compatibility with your wheel's seat type. Improper lug nut seating can lead to wheel separation. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Dodge Viper appears from 1992 to 2017 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 20.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Aftermarket wheels may require hub-centric rings (71.6mm bore) to avoid vibrations.
- ✅ Verify offset: front 50mm, rear 70mm; deviations may cause rubbing on suspension or bodywork.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
1996 Dodge Viper — Frequently Asked Questions
What is the bolt pattern for a 1996 Dodge Viper?
The 1996 Dodge Viper uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.1mm and the offset is 50 front, 70 rearmm.
What other years of Dodge Viper have the same bolt pattern as the 1996?
The Dodge Viper uses the 5x114.3 pattern from 1992 through 2017. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Why is matching the 70.1mm center bore important for the 1996 Viper?
The 70.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 1996 Dodge Viper?
The OEM offset for the 1996 Viper is typically around 50 front, 70 rearmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Dodge fit my 1996 Viper?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.1mm.
Can I use spacers on my 1996 Dodge Viper?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 70.1mm center bore. Also verify that you have enough thread engagement for your N 1/2" (20 UNF) hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset