1997 GMC Savana 1500 Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 GMC Savana 1500 Passenger, along with offset and center bore data.
1997 GMC Savana 1500 Passenger Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
1997 Savana 1500 Passenger — Year-Specific Fitment Context
The 1997 GMC Savana 1500 Passenger is in year 2 of 4 using the 5x127 pattern (1996–1999). Wheels from any 1996–1999 GMC Savana 1500 Passenger are cross-compatible with the 1997 model. Across its full production run (1996–2014), the Savana 1500 Passenger has also used: 6x139.7.
GMC Savana 1500 Passenger Bolt Pattern by Year
The table below shows how the Savana 1500 Passenger's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x127 | 78.1 | 20-30 |
| ▸ 1997 | 5x127 | 78.1 | 20-30 |
| 1998 | 5x127 | 78.1 | 20-30 |
| 1999 | 5x127 | 78.1 | 20-30 |
| 2000 | 6x139.7 | 78.1 | 20-30 |
| 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
| 2014 | 6x139.7 | 78.1 | 20-30 |
5x127 Pattern Context
This bolt pattern appears on 263 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 1997 GMC Savana 1500 Passenger
For your 1997 GMC Savana 1500 Passenger, the bolt pattern is 6x139.7mm with a critical center bore of 78.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 20-30mm; deviations risk rubbing on suspension or bodywork. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—typically conical (60-degree) for aftermarket wheels, but verify. Improper seating can cause wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, GMC Savana 1500 Passenger appears from 1996 to 2014 (19 model years). Across model years, this model appears with 2 bolt patterns (5x127, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore of at least 78.1mm; use hub-centric rings if larger.
- ✅ Avoid using lug nuts with ball seats unless your wheels specifically require them; most aftermarket wheels use conical seats.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
1997 GMC Savana 1500 Passenger — Frequently Asked Questions
What is the bolt pattern for a 1997 GMC Savana 1500 Passenger?
The 1997 GMC Savana 1500 Passenger uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Savana 1500 Passenger have the same bolt pattern as the 1997?
The GMC Savana 1500 Passenger uses the 5x127 pattern from 1996 through 1999. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Do 1997 GMC Savana 1500 Passengers use lug bolts or lug nuts?
The 1997 Savana 1500 Passenger requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 1997 GMC Savana 1500 Passenger?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 20-30mm, and a center bore of at least 78.1mm (using hub rings if larger).
What lug nut size does the 1997 GMC Savana 1500 Passenger use?
The 1997 GMC Savana 1500 Passenger uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 20-30mm offset mean for the 1997 Savana 1500 Passenger?
An offset of 20-30mm means the wheel's mounting surface is 20-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset