2014 Dodge Challenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Dodge Challenger, along with offset and center bore data.
2014 Dodge Challenger Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 18 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Challenger — Year-Specific Fitment Context
The 2014 Dodge Challenger is in year 7 of 16 using the 5x114.3 pattern (2008–2023). Wheels from any 2008–2023 Dodge Challenger are cross-compatible with the 2014 model.
Dodge Challenger Bolt Pattern by Year
The table below shows how the Challenger's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 5x114.3 | 71.5 | 22 |
| 2009 | 5x114.3 | 71.5 | 22 |
| 2010 | 5x114.3 | 71.5 | 22 |
| 2011 | 5x114.3 | 71.5 | 22 |
| 2012 | 5x114.3 | 71.5 | 22 |
| 2013 | 5x114.3 | 71.5 | 22 |
| ▸ 2014 | 5x114.3 | 71.5 | 18 |
| 2015 | 5x114.3 | 71.5 | 18 |
| 2016 | 5x114.3 | 71.5 | 18 |
| 2017 | 5x114.3 | 71.5 | 18 |
| 2018 | 5x114.3 | 71.5 | 18 |
| 2019 | 5x114.3 | 71.5 | 18 |
| 2020 | 5x114.3 | 71.5 | 24 |
| 2021 | 5x114.3 | 71.5 | 24 |
| 2022 | 5x114.3 | 71.5 | 24 |
| 2023 | 5x114.3 | 71.5 | 24 |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Dodge Challenger
For your 2014 Dodge Challenger, ensure aftermarket wheels have a 71.6mm center bore; use hub-centric rings if larger to prevent vibration. The offset is critical: stock is around 18mm, but aftermarket wheels should stay within ±5mm to avoid rubbing or clearance issues. Always match the 5x115 bolt pattern and use lug nuts with the correct thread pitch (14x1.50) and seat type (cone seat). Improper lug nuts can cause wheel separation. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Dodge Challenger appears from 2008 to 2023 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 71.6mm without hub-centric rings.
- ✅ Check offset carefully: lower offset (e.g., 12mm) may cause fender rubbing; higher offset (e.g., 25mm) may contact suspension.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
2014 Dodge Challenger — Frequently Asked Questions
What is the bolt pattern for a 2014 Dodge Challenger?
The 2014 Dodge Challenger uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 18mm.
What other years of Dodge Challenger have the same bolt pattern as the 2014?
The Dodge Challenger uses the 5x114.3 pattern from 2008 through 2023. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Can I use spacers on my 2014 Dodge Challenger?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
What is the center bore of a 2014 Dodge Challenger?
The factory center bore (hub bore) for the 2014 Dodge Challenger is 71.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2014 Dodge Challenger?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 18mm, and a center bore of at least 71.5mm (using hub rings if larger).
Do 2014 Dodge Challengers use lug bolts or lug nuts?
The 2014 Challenger requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset