2002 Toyota 4Runner Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Toyota 4Runner, along with offset and center bore data.
2002 Toyota 4Runner Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 12 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2002 4Runner — Year-Specific Fitment Context
The 2002 model year marks the beginning of the Toyota 4Runner's 5x114.3 bolt pattern era, which continued through 2019 (18 consecutive years). Wheels from any 2002–2019 Toyota 4Runner are cross-compatible with the 2002 model. Note: the 2001 model used a different pattern (6x139.7), so its wheels are NOT interchangeable with the 2002. Across its full production run (1992–2024), the 4Runner has also used: 6x139.7.
Toyota 4Runner Bolt Pattern by Year
The table below shows how the 4Runner's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 30 |
| 1993 | 6x139.7 | 106.1 | 30 |
| 1994 | 6x139.7 | 106.1 | 30 |
| 1995 | 6x139.7 | 106.1 | 30 |
| 1996 | 6x139.7 | 106.1 | 30 |
| 1997 | 6x139.7 | 106.1 | 12 |
| 1998 | 6x139.7 | 106.1 | 12 |
| 1999 | 6x139.7 | 106.1 | 12 |
| 2000 | 6x139.7 | 106.1 | 12 |
| 2001 | 6x139.7 | 106.1 | 12 |
| ▸ 2002 | 5x114.3 | 106.1 | 12 |
| 2003 | 5x114.3 | 60.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 25 |
| 2005 | 5x114.3 | 60.1 | 25-30 |
| 2006 | 5x114.3 | 60.1 | 25-30 |
| 2007 | 5x114.3 | 60.1 | 25-30 |
| 2008 | 5x114.3 | 60.1 | 25-30 |
| 2009 | 5x114.3 | 106.1 | 25-30 |
| 2010 | 5x114.3 | 60.1 | 25-30 |
| 2011 | 5x114.3 | 60.1 | 25-30 |
| 2012 | 5x114.3 | 60.1 | 25-30 |
| 2013 | 5x114.3 | 60.1 | 25-30 |
| 2014 | 5x114.3 | 60.1 | 25-30 |
| 2015 | 5x114.3 | 60.1 | 25-30 |
| 2016 | 5x114.3 | 60.1 | 25-30 |
| 2017 | 5x114.3 | 60.1 | 25-30 |
| 2018 | 5x114.3 | 60.1 | 25-30 |
| 2019 | 5x114.3 | 60.1 | 25-30 |
| 2020 | 6x139.7 | 106.2 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2002 Toyota 4Runner
For your 2002 Toyota 4Runner, the 6x139.7 bolt pattern is shared across 1992–2024 models, ensuring broad cross-compatibility. However, the 106.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory spec is 12mm, but a range of 0–25mm is acceptable. Exceeding this can cause rubbing or bearing stress. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball) to avoid loosening. Never reuse old lug nuts; torque to 83 ft-lbs in a star pattern.
Historical Fitment Data Reference
In our dataset, Toyota 4Runner appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to account for wheel settlement.
- ✅ Avoid using wheels from 1995–2000 Tacomas (same bolt pattern but different offset and bore).
- ✅ Check for clearance with aftermarket wheels: 16x7 with 265/75R16 tires may rub the upper control arm if offset is below 10mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2002 Toyota 4Runner — Frequently Asked Questions
What is the bolt pattern for a 2002 Toyota 4Runner?
The 2002 Toyota 4Runner uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 12mm.
What other years of Toyota 4Runner have the same bolt pattern as the 2002?
The Toyota 4Runner uses the 5x114.3 pattern from 2002 through 2019. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Can I use 2001 Toyota 4Runner wheels on a 2002?
No. The 2001 4Runner used a 6x139.7 bolt pattern, which differs from the 2002's 5x114.3. They are not interchangeable.
How tight should I torque the lug nuts on a 2002 Toyota 4Runner?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2002 Toyota 4Runner?
The OEM offset for the 2002 4Runner is typically around 12mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2002 Toyota 4Runner?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 12mm, and a center bore of at least 106.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset