2016 Toyota 4Runner Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Toyota 4Runner, along with offset and center bore data.
2016 Toyota 4Runner Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 4Runner — Year-Specific Fitment Context
The 2016 Toyota 4Runner is in year 15 of 18 using the 5x114.3 pattern (2002–2019). Wheels from any 2002–2019 Toyota 4Runner are cross-compatible with the 2016 model. Across its full production run (1992–2024), the 4Runner has also used: 6x139.7.
Toyota 4Runner Bolt Pattern by Year
The table below shows how the 4Runner's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 30 |
| 1993 | 6x139.7 | 106.1 | 30 |
| 1994 | 6x139.7 | 106.1 | 30 |
| 1995 | 6x139.7 | 106.1 | 30 |
| 1996 | 6x139.7 | 106.1 | 30 |
| 1997 | 6x139.7 | 106.1 | 12 |
| 1998 | 6x139.7 | 106.1 | 12 |
| 1999 | 6x139.7 | 106.1 | 12 |
| 2000 | 6x139.7 | 106.1 | 12 |
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 5x114.3 | 106.1 | 12 |
| 2003 | 5x114.3 | 60.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 25 |
| 2005 | 5x114.3 | 60.1 | 25-30 |
| 2006 | 5x114.3 | 60.1 | 25-30 |
| 2007 | 5x114.3 | 60.1 | 25-30 |
| 2008 | 5x114.3 | 60.1 | 25-30 |
| 2009 | 5x114.3 | 106.1 | 25-30 |
| 2010 | 5x114.3 | 60.1 | 25-30 |
| 2011 | 5x114.3 | 60.1 | 25-30 |
| 2012 | 5x114.3 | 60.1 | 25-30 |
| 2013 | 5x114.3 | 60.1 | 25-30 |
| 2014 | 5x114.3 | 60.1 | 25-30 |
| 2015 | 5x114.3 | 60.1 | 25-30 |
| ▸ 2016 | 5x114.3 | 60.1 | 25-30 |
| 2017 | 5x114.3 | 60.1 | 25-30 |
| 2018 | 5x114.3 | 60.1 | 25-30 |
| 2019 | 5x114.3 | 60.1 | 25-30 |
| 2020 | 6x139.7 | 106.2 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Toyota 4Runner
For your 2016 Toyota 4Runner, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 25-30mm to avoid rubbing on suspension or body. Always use 12x1.5 lug nuts with the correct seat—factory is conical (60-degree). Mixing seat types (e.g., ball seat) can cause wheel loosening. Verify lug nut engagement: at least 6-8 full turns. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota 4Runner appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 106.1mm center bore.
- ✅ Avoid wheels with offset below 25mm; they may rub the upper control arm or fender liner.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2016 Toyota 4Runner — Frequently Asked Questions
What is the bolt pattern for a 2016 Toyota 4Runner?
The 2016 Toyota 4Runner uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 25-30mm.
What other years of Toyota 4Runner have the same bolt pattern as the 2016?
The Toyota 4Runner uses the 5x114.3 pattern from 2002 through 2019. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What does 25-30mm offset mean for the 2016 4Runner?
An offset of 25-30mm means the wheel's mounting surface is 25-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the center bore of a 2016 Toyota 4Runner?
The factory center bore (hub bore) for the 2016 Toyota 4Runner is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2016 Toyota 4Runner?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2016 Toyota 4Runner?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 25-30mm, and a center bore of at least 60.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset