2011 Toyota 4Runner Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Toyota 4Runner, along with offset and center bore data.
2011 Toyota 4Runner Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 25-30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 4Runner — Year-Specific Fitment Context
The 2011 Toyota 4Runner is in year 10 of 18 using the 5x114.3 pattern (2002–2019). Wheels from any 2002–2019 Toyota 4Runner are cross-compatible with the 2011 model. Across its full production run (1992–2024), the 4Runner has also used: 6x139.7.
Toyota 4Runner Bolt Pattern by Year
The table below shows how the 4Runner's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 106.1 | 30 |
| 1993 | 6x139.7 | 106.1 | 30 |
| 1994 | 6x139.7 | 106.1 | 30 |
| 1995 | 6x139.7 | 106.1 | 30 |
| 1996 | 6x139.7 | 106.1 | 30 |
| 1997 | 6x139.7 | 106.1 | 12 |
| 1998 | 6x139.7 | 106.1 | 12 |
| 1999 | 6x139.7 | 106.1 | 12 |
| 2000 | 6x139.7 | 106.1 | 12 |
| 2001 | 6x139.7 | 106.1 | 12 |
| 2002 | 5x114.3 | 106.1 | 12 |
| 2003 | 5x114.3 | 60.1 | 12 |
| 2004 | 6x139.7 | 106.1 | 25 |
| 2005 | 5x114.3 | 60.1 | 25-30 |
| 2006 | 5x114.3 | 60.1 | 25-30 |
| 2007 | 5x114.3 | 60.1 | 25-30 |
| 2008 | 5x114.3 | 60.1 | 25-30 |
| 2009 | 5x114.3 | 106.1 | 25-30 |
| 2010 | 5x114.3 | 60.1 | 25-30 |
| ▸ 2011 | 5x114.3 | 60.1 | 25-30 |
| 2012 | 5x114.3 | 60.1 | 25-30 |
| 2013 | 5x114.3 | 60.1 | 25-30 |
| 2014 | 5x114.3 | 60.1 | 25-30 |
| 2015 | 5x114.3 | 60.1 | 25-30 |
| 2016 | 5x114.3 | 60.1 | 25-30 |
| 2017 | 5x114.3 | 60.1 | 25-30 |
| 2018 | 5x114.3 | 60.1 | 25-30 |
| 2019 | 5x114.3 | 60.1 | 25-30 |
| 2020 | 6x139.7 | 106.2 | 25-30 |
| 2021 | 6x139.7 | 106.1 | 25-30 |
| 2022 | 6x139.7 | 106.1 | 25-30 |
| 2023 | 6x139.7 | 106.1 | 25-30 |
| 2024 | 6x139.7 | 106.1 | 25-30 |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Toyota 4Runner
The 2011 Toyota 4Runner uses a 6x139.7mm bolt pattern with a 106.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations and ensure proper load distribution. Offset should stay within 25-30mm to avoid rubbing or clearance issues with suspension and brake components. Always use the correct 12x1.5 lug nuts with the appropriate seat type (conical or ball seat) matching the wheel's design. Mismatched lug nuts can cause wheel loosening or damage. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Toyota 4Runner appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 60.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 106.1mm bore is critical for vibration-free driving.
- ✅ Check for brake caliper clearance when using wheels with offset near 25mm, as some aftermarket calipers may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2011 Toyota 4Runner — Frequently Asked Questions
What is the bolt pattern for a 2011 Toyota 4Runner?
The 2011 Toyota 4Runner uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 25-30mm.
What other years of Toyota 4Runner have the same bolt pattern as the 2011?
The Toyota 4Runner uses the 5x114.3 pattern from 2002 through 2019. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 Toyota 4Runner?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 4Runner, the PCD is 5x114.3.
What does 25-30mm offset mean for the 2011 4Runner?
An offset of 25-30mm means the wheel's mounting surface is 25-30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I use spacers on my 2011 Toyota 4Runner?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Why is matching the 60.1mm center bore important for the 2011 4Runner?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset