2010 Ford F450 Super Duty Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Ford F450 Super Duty Crew Cab, along with offset and center bore data.
2010 Ford F450 Super Duty Crew Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 125.1 mm |
| Offset (ET) | 0 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 F450 Super Duty Crew Cab — Year-Specific Fitment Context
The 2010 Ford F450 Super Duty Crew Cab is in year 3 of 17 using the 8x170 pattern (2008–2024). Wheels from any 2008–2024 Ford F450 Super Duty Crew Cab are cross-compatible with the 2010 model.
Ford F450 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F450 Super Duty Crew Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2008 | 8x170 | 125.1 | 0 |
| 2009 | 8x170 | 125.1 | 0 |
| ▸ 2010 | 8x170 | 125.1 | 0 |
| 2011 | 8x170 | 125.1 | 0 |
| 2012 | 8x170 | 125.1 | 0 |
| 2013 | 8x170 | 125.1 | 0 |
| 2014 | 8x170 | 125.1 | 0 |
| 2015 | 8x170 | 125.1 | 0 |
| 2016 | 8x170 | 124.9 | 0 |
| 2017 | 8x170 | 125.1 | 0 |
| 2018 | 8x170 | 124.9 | 0 |
| 2019 | 8x170 | 124.9 | 0 |
| 2020 | 8x170 | 124.9 | 0 |
| 2021 | 8x170 | 124.9 | 0 |
| 2022 | 8x170 | 124.9 | 0 |
| 2024 | 8x170 | 124.9 | 0 |
8x170 Pattern Context
This bolt pattern appears on 173 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x170:
Expert Buying Guide for 2010 Ford F450 Super Duty Crew Cab
The 2010 Ford F450 Super Duty Crew Cab uses a 10x225 bolt pattern with a 170.1mm center bore. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibration and ensure proper load distribution. The offset is critical: the factory offset is 0mm; deviations can cause rubbing or clearance issues with the massive brakes and suspension. Always verify lug nut compatibility: the thread pitch is 14x1.5, and the seat type must match (factory uses cone seat). Using incorrect lug nuts can lead to wheel detachment. For safety, re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford F450 Super Duty Crew Cab appears from 2008 to 2024 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 165 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Aftermarket wheels may require hub-centric rings (170.1mm to 78.1mm) to avoid vibration.
- ✅ Avoid wheels with offset beyond +/- 12mm to prevent rubbing on brake calipers or suspension components.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
2010 Ford F450 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Ford F450 Super Duty Crew Cab?
The 2010 Ford F450 Super Duty Crew Cab uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.1mm and the offset is 0mm.
What other years of Ford F450 Super Duty Crew Cab have the same bolt pattern as the 2010?
The Ford F450 Super Duty Crew Cab uses the 8x170 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2010 Ford F450 Super Duty Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x170 bolt pattern, an offset near 0mm, and a center bore of at least 125.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2010 Ford F450 Super Duty Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2010 Ford F450 Super Duty Crew Cab?
The OEM offset for the 2010 F450 Super Duty Crew Cab is typically around 0mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2010 Ford F450 Super Duty Crew Cab use?
The 2010 Ford F450 Super Duty Crew Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset