2020 Nissan Armada Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan Armada, along with offset and center bore data.
2020 Nissan Armada Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 25 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Armada — Year-Specific Fitment Context
The 2020 Nissan Armada is in year 4 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Nissan Armada are cross-compatible with the 2020 model. Across its full production run (2005–2024), the Armada has also used: 6x139.7.
Nissan Armada Bolt Pattern by Year
The table below shows how the Armada's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 6x139.7 | 78.1 | 24 |
| 2006 | 6x139.7 | 110.1 | 24 |
| 2007 | 6x139.7 | 110.1 | 24 |
| 2008 | 6x139.7 | 78.1 | 24 |
| 2009 | 6x139.7 | 78.1 | 24 |
| 2010 | 6x139.7 | 110.1 | 24 |
| 2011 | 6x139.7 | 110.1 | 24 |
| 2012 | 6x139.7 | 78.1 | 24 |
| 2013 | 6x139.7 | 110.1 | 24 |
| 2014 | 6x139.7 | 110.1 | 24 |
| 2015 | 6x139.7 | 110.1 | 24 |
| 2017 | 5x114.3 | 66.1 | 25 |
| 2018 | 5x114.3 | 66.1 | 25 |
| 2019 | 5x114.3 | 66.1 | 25 |
| ▸ 2020 | 5x114.3 | 66.1 | 25 |
| 2021 | 5x114.3 | 66.1 | 25 |
| 2022 | 5x114.3 | 66.1 | 25 |
| 2023 | 5x114.3 | 66.1 | 25 |
| 2024 | 5x114.3 | 66.1 | 25 |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Nissan Armada
For your 2020 Nissan Armada, the critical fitment specs are a 6x139.7 bolt pattern, 77.8mm center bore, and 25mm offset. Aftermarket wheels often have a larger center bore, so hub-centric rings (77.8mm ID to 73.1mm or other) are mandatory to prevent vibrations and ensure load is on the hub, not the lug nuts. The offset is sensitive: staying within ±5mm of 25mm is recommended to avoid rubbing or poor handling. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (cone or ball seat) matching the wheel; improper seating can cause wheel loss. Verify lug nut torque to 98 ft-lbs and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Nissan Armada appears from 2005 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid using aftermarket wheels without hub-centric rings; the 77.8mm bore is specific and rings prevent vibration.
- ✅ Check that aftermarket wheels have sufficient clearance for the large brake calipers on the Armada.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2020 Nissan Armada — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan Armada?
The 2020 Nissan Armada uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 25mm.
What other years of Nissan Armada have the same bolt pattern as the 2020?
The Nissan Armada uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the factory wheel offset for a 2020 Nissan Armada?
The OEM offset for the 2020 Armada is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2020 Nissan Armada?
The factory center bore (hub bore) for the 2020 Nissan Armada is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 66.1mm center bore important for the 2020 Armada?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 25mm offset mean for the 2020 Armada?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset