1993 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Nissan Altima, along with offset and center bore data.
1993 Nissan Altima Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 Altima — Year-Specific Fitment Context
The 1993 model year marks the beginning of the Nissan Altima's 4x114.3 bolt pattern era, which continued through 1998 (6 consecutive years). Wheels from any 1993–1998 Nissan Altima are cross-compatible with the 1993 model. Important: starting in 1994, Nissan switched to 4x100 — those wheels will not fit the 1993 model. Across its full production run (1993–2024), the Altima has also used: 4x100, 5x114.3.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1993 | 4x114.3 | 66.1 | 35-45 |
| 1994 | 4x100 | 66.1 | 35-45 |
| 1995 | 4x114.3 | 66.1 | 35-45 |
| 1996 | 4x114.3 | 66.1 | 35-45 |
| 1997 | 4x114.3 | 66.1 | 35-45 |
| 1998 | 4x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
4x114.3 Pattern Context
This bolt pattern appears on 174 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1993 Nissan Altima
For your 1993 Nissan Altima, the 5x114.3 bolt pattern is shared with all Altimas from 1993-2024, but the 66.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 35-45mm; deviating risks rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and proper seat type (cone or ball seat) matching the wheel. Improper lug nuts can loosen or damage the wheel. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 66.1mm and outer diameter matches wheel bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to stay within 35-45mm range.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
1993 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 1993 Nissan Altima?
The 1993 Nissan Altima uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan Altima have the same bolt pattern as the 1993?
The Nissan Altima uses the 4x114.3 pattern from 1993 through 1998. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
Will 1994 Nissan Altima wheels fit a 1993 model?
No. The 1994 Nissan Altima switched to a 4x100 bolt pattern, which is not compatible with the 1993 model's 4x114.3. Using mismatched patterns is unsafe.
What does 35-45mm offset mean for the 1993 Altima?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Will wheels from another Nissan fit my 1993 Altima?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Do 1993 Nissan Altimas use lug bolts or lug nuts?
The 1993 Altima requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset