2018 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Nissan Altima, along with offset and center bore data.
2018 Nissan Altima Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Altima — Year-Specific Fitment Context
The 2018 Nissan Altima is in year 20 of 26 using the 5x114.3 pattern (1999–2024). Wheels from any 1999–2024 Nissan Altima are cross-compatible with the 2018 model. Across its full production run (1993–2024), the Altima has also used: 4x100, 4x114.3.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 4x114.3 | 66.1 | 35-45 |
| 1994 | 4x100 | 66.1 | 35-45 |
| 1995 | 4x114.3 | 66.1 | 35-45 |
| 1996 | 4x114.3 | 66.1 | 35-45 |
| 1997 | 4x114.3 | 66.1 | 35-45 |
| 1998 | 4x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| ▸ 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Nissan Altima
For your 2018 Nissan Altima, the critical fitment specs are 5x114.3 bolt pattern, 66.1mm center bore, 40mm offset, and 12x1.25 lug nuts. The center bore must match exactly; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: staying within ±5mm of 40mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nut seat type (conical 60-degree for most aftermarket wheels) and torque to manufacturer specs (80 ft-lbs). Re-torque after 50-100 miles. Avoid mixing lug nut types or using incorrect thread pitch.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 66.1mm center bore.
- ✅ Verify offset stays within 35-45mm to prevent fender rubbing or brake caliper contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2018 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 2018 Nissan Altima?
The 2018 Nissan Altima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Altima have the same bolt pattern as the 2018?
The Nissan Altima uses the 5x114.3 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2018 Nissan?
The 2018 Altima uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2018 Nissan Altima?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the factory wheel offset for a 2018 Nissan Altima?
The OEM offset for the 2018 Altima is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2018 Nissan Altima?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset