1999 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Nissan Altima, along with offset and center bore data.
1999 Nissan Altima Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1999 Altima — Year-Specific Fitment Context
The 1999 model year marks the beginning of the Nissan Altima's 5x114.3 bolt pattern era, which continued through 2024 (26 consecutive years). Wheels from any 1999–2024 Nissan Altima are cross-compatible with the 1999 model. Note: the 1998 model used a different pattern (4x114.3), so its wheels are NOT interchangeable with the 1999. Across its full production run (1993–2024), the Altima has also used: 4x100, 4x114.3.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 4x114.3 | 66.1 | 35-45 |
| 1994 | 4x100 | 66.1 | 35-45 |
| 1995 | 4x114.3 | 66.1 | 35-45 |
| 1996 | 4x114.3 | 66.1 | 35-45 |
| 1997 | 4x114.3 | 66.1 | 35-45 |
| 1998 | 4x114.3 | 66.1 | 35-45 |
| ▸ 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 3040 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1999 Nissan Altima
For your 1999 Nissan Altima, the 5x114.3 bolt pattern is shared across 1993–2024 models, but the 66.1mm center bore is critical. Aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 35–45mm; deviating can cause rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and proper seat type—factory wheels use conical (60-degree) seats; aftermarket wheels may require ball or conical seats. Never mix seat types; improper engagement can lead to wheel loss.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid using universal fitment wheels without hub-centric rings; the 66.1mm bore is specific and rings are mandatory for safe fitment.
- ✅ Check for caliper clearance when using 17-inch or larger wheels; some aftermarket designs may contact the brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
1999 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 1999 Nissan Altima?
The 1999 Nissan Altima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan Altima have the same bolt pattern as the 1999?
The Nissan Altima uses the 5x114.3 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Can I use 1998 Nissan Altima wheels on a 1999?
No. The 1998 Altima used a 4x114.3 bolt pattern, which differs from the 1999's 5x114.3. They are not interchangeable.
Why is matching the 66.1mm center bore important for the 1999 Altima?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 1999 Nissan Altima?
The OEM offset for the 1999 Altima is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 1999 Nissan Altima?
The factory center bore (hub bore) for the 1999 Nissan Altima is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset