1995 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Nissan Altima, along with offset and center bore data.
1995 Nissan Altima Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Altima — Year-Specific Fitment Context
The 1995 Nissan Altima is in year 3 of 6 using the 4x114.3 pattern (1993–1998). Wheels from any 1993–1998 Nissan Altima are cross-compatible with the 1995 model. Note: the 1994 model used a different pattern (4x100), so its wheels are NOT interchangeable with the 1995. Across its full production run (1993–2024), the Altima has also used: 4x100, 5x114.3.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 1995 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 4x114.3 | 66.1 | 35-45 |
| 1994 | 4x100 | 66.1 | 35-45 |
| ▸ 1995 | 4x114.3 | 66.1 | 35-45 |
| 1996 | 4x114.3 | 66.1 | 35-45 |
| 1997 | 4x114.3 | 66.1 | 35-45 |
| 1998 | 4x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
4x114.3 Pattern Context
This bolt pattern appears on 174 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1995 Nissan Altima
For your 1995 Nissan Altima, the 5x114.3 bolt pattern is shared across 1993–2024 models, ensuring broad compatibility. Critical to proper fitment is the 66.1mm center bore; aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and load stress. Offset must stay within 35–45mm; deviating risks rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and proper seat type (conical 60-degree for most aftermarket wheels, ball seat for some OEM). Mismatched lug nuts can cause wheel loosening or damage. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause vibration and hub damage.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as some aftermarket designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
1995 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 1995 Nissan Altima?
The 1995 Nissan Altima uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
What other years of Nissan Altima have the same bolt pattern as the 1995?
The Nissan Altima uses the 4x114.3 pattern from 1993 through 1998. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Can I use 1994 Nissan Altima wheels on a 1995?
No. The 1994 Altima used a 4x100 bolt pattern, which differs from the 1995's 4x114.3. They are not interchangeable.
How tight should I torque the lug nuts on a 1995 Nissan Altima?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 1995 Nissan Altimas use lug bolts or lug nuts?
The 1995 Altima requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1995 Nissan?
The 1995 Altima uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset